The Leader In Joint Reinforcement
Galvanized Ladder Wire
All Powers Steel Power-Lok ladder wire is mill galvanized with properly deformed Side Rods to provide maximum mortar bond. Longitudinal wires are two inches plus or minus one-eighth less than normal width of the unit wall. Cross rods are butt welded at 16 inches on center to increase bond strength.
- Style: Ladder
- Sizes: 4", 6", 8", and 12"
- Coatings: Mill galvanized
- 9 gauge side rods
- 9 gauge cross rods
- Fabricated and furnished in 10' lengths
- Large on-site inventory
Powers Steel Material Compliance
- TMS 402/602 Building Code
- Wire (carbon steel): Cold-drawn steel wire conforming to ASTM A1064
- Tensile Strength: 80,000 psi | Yield Point - 70,000 psi minimum
- Mill Galvanized Coating: ASTM A641/A641M (0.1 oz/ft2)
- Wire Diameter: 9 gauge (.148" or W1.7)
- Cross welded 16" O.C.
